 |
|
OPTO
5 Button Desktop Control
HC/1
|
Potless five button
deskpad control offers rotary speed control for +WinPlus+
Studio & News. It includes page/bookmark/snapshot next
or previous, back to top
of script function, and blank screen and programmable function
button.
Suitable for use on locations or studios. Control Net Enabled.
Ergonomically designed / Rugged forming /
Jog dial design with simple and clear buttons / Potless
scroll for 100% reliability.
|
|
|
|
New
Wireless Scroll Control
RAT |
|
The RAT (Receive And Transmit) allows
total freedom for the presenter to move around a studio
and control
the speed of the prompted text. Control is via a rocker
pot for forwards and backwards direction, with a centre
stop.
Push buttons are provided for next and previous stories.
A GPI interface is also provided for control of graphics
or backgrounds. The RAT interfaces with all the
+WinPlus+ software packages and Smart Combi
Control Net applications. Base receiver provided with
Channel selection.
Product Specifications:
Weight: 160gms (6oz)
Freq: RF433mhz Europe / 900 mhz US
Power: 9V AA Battery
Size: 11 x 4.5 x 3cm (4.3" x 1.7" x .2")
Channels: 0-9
Maximum Distance to Receiver: 150 metres (495 feet)
Unique one minute Power Save mode when idle
On/Off switch situated on the base of the control.
Loop for lanyard strap at base
Receiver: External PSU
Weight: 125gms (4oz)
Freq: RF433mhz Europe / 900mhz US
Power: 12V
Data Output: BNC - 9 way D
External PSU
Channels: 0-9
|
|
|
|
USB
VGA Scroll Control
HC/5
|
This rotary speed control for
VGA +WinPlus+ offers center stop for forward and reverse,
select next page and previous page and top of script selection.
Ergonomically designed / Rugged forming / Jog dial design
with simple and clear buttons.
|
|
|
|
2Desk
Pad & Foot Control
FCDP5 |
This Potless Foot Control for
100% reliability can be used with +WinPlus+ Studio and News.
The six button deskpad provides the ability to jump page,
bookmark/snapshot to previous or next, blank screen, back
to top of script and programmable function button.
Comes with an additional button for forward and
reverse action. Fully configurable to be used with Control
Net.
Ergonomically designed / Rugged forming / Simple and clear
buttons / Potless scroll for 100% reliability / Tough and
durable design to the foot control.
|
|
|
|
Xbox
USB Device
Xbox |
Based on our successful PCIPrompt
Card, the XBOX USB provides an external box solution for
prompting. This is ideal for portable prompting. Just plug
it into a laptop with a USB interface. The video output
is standard composite PAL or NTSC and is compatible
with all our Flat Panel TFT displays and conventional
CRT-based oncamera units.
It runs with exactly the same WinPlus versions that run
with the PCIPrompt Card, no additional operator training
required. Standard USB interface / PAL / NTSC Color capable
/ Works with color version of +WinPlus+ software / Two composite
PAL/NTSC video outputs / Genlock input.
Works with original and new opto-scroll controllers / Low
Power 12 volt operation / Docking Mains Power / VDA option
/ Perfect for location prompting
|
|
 |
|
Clip
On Studio Module for XBox
XBOX VDA |
The unit provides power through
an IEC input and internal universal 110/240V AC PSU which
power the XBox USB. It also includes a Video Distribution
Amplifier to provide an additional four composite video
outputs.
Universal 110/240V mains input / Four output VDA / Simple
docking to the prompter module with built-in connectors
/ Purpose-designed rack mount tray available
|
|
 |
|
Smart
Combiner Box
SCB |
Up to four Opto Hand or Foot
controls can be used with the PCIPrompt card using the Smart
Combiner box. The box plugs into the nine-way D connector
PCIPrompt
card. It has four coax inputs that accept connections from
the controllers via their associated coax adapters (see
previous section for adapter details).
Smart Combi's can be linked via standard 75 ohm coax cable
and can be located up to 300 meters from one another. Universal
110/240 Mains input / Quick installation / Unlimited expansion
capabilities via expansion connectors.
|
|
|
|
New
+TallyPlus+
Tally-P |
A unique camera number system
from Autoscript. A large LED indicator displays the camera
in green (1-9) whilst in standby and then turns red when
the
camera is live.
Switching from green to red is achieved by a photo electric
cell that can be attached to the camera tally light. +TallyPlus+
retrofits to the whole range of Autoscript TFT's and has
the unique feature of a 2nd photo electric cell built into
the rear of +TallyPlus+ that docks
with Cue light on the TFT.
Product Specifications:
Power: 12V DC 0.25amps
Number Selection: Rotary Switch
Sensor Trim: Rotary Pot
Optical Sensor Input
Tally Signal input from TFT
External PSU supplied if required
|
|
 |
|
BFT
3.5" Monitor
TFT-3 |
|
New to the range of TFT monitors offered
by Autoscript is the TFT 3.5". It's the perfect solution
for location use for either operator preview or as a straight
reading monitor mounted on the camera handle. It offers
a
scan reverse and direction switch. The TFT 3.5" monitor
is built into a robust aluminum case.
Product Specifications:
Brightness: 300 nits
Weight: 0.2kgs (1/2 lb)
Power: 12V DC 0.5amps
Power Supply: External PSU
Video Input: 75ohm BNC
Controls Brightness, Contrast, Color, Tint.
1/4" fixing for mounting
|
|
 |
|
New
6.8" TFT
PV-7 |
Operator 6.8" TFT Preview
Monitor is the perfect solution to cut down on real estate
in studio galleries or desktops. Lightweight and robust
with exceptional viewing angle and brightness. Offers a
scan reverse and direction switch.
Product Specifications:
Brightness: 300 nits
Weight: 0.2kgs (1/2 lb)
Power: 12V DC 0.5amps
Power Supply: External PSU
Video Input: 75ohm BNC
Controls Brightness, Contrast, Color, Tint.
1/4" fixing for mounting
|
|
 |
|
Arri
Mounting Plate
ARRI/MT |
For the ultimate flexibility
and rigidity for studio and film cameras. The Arri Mounting
Plate is suitable for use with all pan & tilt heads
and provides an outstandingly rigid mount for on-camera
prompters up to the 20" TFT.
The combination of the sliding rods and sliding base enables
exceptionally quick and perfect balance with a wide range
of cameras and pan & tilt heads.
Suitable for use with the 12", 15", 17" &
20" TFT's.
|
|
 |
|
Mt/Plate
Red
MT/RED |
The MT/Red plate is machined
from solid aluminium for strength and lightness. An integral
riser plate enables
the camera to be raised and the sliding mounting
rods ensure quick and simple set-up and balancing of
the prompter.
Suitable for use with the 10", 12" & 15"
TFT's
|
|
 |
|
Mt/Plate
Blue
MT/BLUE |
Machined miniature mounting
plate for use with ENG
and pan tilt heads. Perfect solution for DV cams and
jib arms.
Suitable for use with the 6" & 8" TFT's
|
|
 |
|
Plus
Light+
Plus-Light
5600
|
The Plus-Light is the perfect
fill light. Mounted to and powered by Autoscript’s
TFT On Camera Prompters.
Using an LED array, the Plus-Light offers soft controllable
light without all the hassles of conventional
tungsten fixtures. No AC cables to the Camera/Pedestal,
no heat problems, and a simple mounting solution.
Available in daylight and tungsten. The Plus-Light is perfect
for in Studio and Field alike.
Product Specifications:
PL-5600
Color balance: 5,600 ° K
Angle: 20º
Weight: 10 Oz
LED Array: 112 LED in 8*14
Power: 6 to 25V
Consumption: 6.8 watts at 12 Volt
Mounting: ¼ 20
Dimmer: 0 to 100% with Constant 5,600K temp
PL-3200
Colour Balance: 3,200 ° K
Angle: 40º
Weight: 10 Oz
LED Array: 112 LED in 8*14
Power: 6 to 25V
Consumption: 6.8 watts at 12 Volt
Mounting: ¼ 20
Dimmer: 0 to 100% with Constant 5,600K temp
|
|
