The FingerWorks Studio Version is designed for studio use
or permanent installation in a TV Mobile. It consists of a rack
mount PC and an outboard
17, 19 or 21 inch LCD/Touchscreen. The LCD can be rack mount or
desktop.
The desktop version comes with a heavy duty adjustable stand.
The
LCD/Touchscreen can be connected to the PC using analogue cables
for VGA/DVI
and COM/USB and is limited to a length of approximately 40 feet
or less. The LCD/Touchscreen can also be connected to the PC using
a KVM extender. These extenders can be either CAT5 or Fiber. The
KVM extender will also need COM or USB capability for the touchscreen.
In this configuration the LCD/Touchscreen can be up to 1,000 feet
away from the PC on CAT5 or
up to 30,000 feet using a Fiber KVM extender.
The
Studio Version is available in dual SD-SDI / HD. The PC is very
close to
the main distribution area so the length of cable runs is not an
issue.
The
Studio Version allows two LCD/Touchscreens to be connected to
one system. Both will function alternately but not simultaneously.
SDI
Version:
SDI (Digital) Adjustments Available:
Genlock Internal/Blackburst Reference/4:2:2 (SDI)
Vertical Phase
Horizontal Phase
Fine Horizontal Phase
Fill Offset
Key Offset
(The PC is very close to the main distribution area so the length
of cable
runs is not an issue).
For more
information contact:
Tony Hambling
+613 9819 6455
tony@mtasales.com.au
<<Back
|